Netgear SRK60B03 User Manual - Page 91
Guest Portal Network Name, Enable Guest Portal Network
View all Netgear SRK60B03 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Orbi Pro Router SRR60 and Orbi Pro Satellite SRS60 To set up a guest network: 1. Launch a web browser from a computer or mobile device that is connected to your Orbi network. 2. Enter orbilogin.com. A login window opens. 3. Enter the Orbi admin user name and password. The user name is admin. The password is the one that you specified the first time that you logged in. The user name and password are case-sensitive. The BASIC Home page displays. 4. Select Guest Portal. The Guest Portal Settings page displays. 5. To enable the guest portal, select the Enable Guest Portal Network check box. By default, the guest portal is disabled. 6. Leave the Enable SSID Broadcast check box selected. Allowing the router to broadcast its WiFi network name (SSID) makes it easier to find your network and connect to it. If you clear this check box, that creates a hidden network. 7. To change the network name, type a new name in the Guest Portal Network Name (SSID) field. The name can be up to 32 characters long and it is case-sensitive. If you change the name, make sure to write down the new name and keep it in a safe place. 8. In the Authentication Mode section, leave the Local radio button selected. 9. In the Authentication Options section, either specify an open network or set an authentication password by doing one of the following: • None. To specify an open network without authentication, select the None radio button. • Password Authentication. To set an authentication password, select the Password Authentication radio button and specify a password in the field. The password must be a minimum of 8 characters and can be a maximum of 64 characters. Note: In order for visitors to access the Internet, they must enter this password in the guest portal. Specify Network Settings 91 User Manual