Netgear WGR614v8 WGR614v8 User Manual - Page 118
Apply, Wireless Settings, Enable Wireless Router Radio, Enable SSID Broadcast, Setup Access List
View all Netgear WGR614v8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
54 Mbps Wireless Router WGR614v8 User Manual 6. For Security Options, select None. 7. Click Apply to save your changes. Note: If you are configuring the router from a wireless computer and you change the router's SSID, channel, or security settings, you will lose your wireless connection when you click Apply. You must then change the wireless settings of your computer to match the router's new settings. 8. Select Wireless Settings under Advanced in the main menu of the WGR614v8 router. Figure 7-2 9. Make sure that the Enable Wireless Router Radio and Enable SSID Broadcast check boxes are selected. 10. Click Setup Access List. 11. Make sure that the Turn Access Control On check box is not selected. 12. Configure and test your wireless computer for wireless connectivity. Program the wireless adapter of your computer to have the same SSID and channel that you specified in the router, and disable encryption. Check that your computer has a wireless link and can obtain an IP address by DHCP from the router. Once your computer has basic wireless connectivity to the router, you can configure the advanced wireless security functions of the computer and router (for more information about security, see Chapter 2, "Safeguarding Your Network"). 7-12 v1.1, May 2008 Troubleshooting