Netgear WN111v2 WN111v2 User Manual - Page 36

Setting Up WEP Encryption Security, WPA-PSK [TKIP], WPA2-PSK [AES], Save Profile, Apply, Close - install

Get Netgear WN111v2 - RangeMax Next Wireless USB 2.0 Adapter PDF manuals and user guides View all Netgear WN111v2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

NETGEAR RangeMax Wireless-N USB 2.0 Adapter WN111v2 User Manual c. In the Security section, select WPA-PSK [TKIP] or WPA2-PSK [AES], and enter the passphrase. Figure 2-13 For more about WPA2-PSK, see the link to "Wireless Communications:" in Appendix B. 3. Save your settings in a profile. a. Click the Save Profile button. All the configuration settings are saved in this profile. b. Click Apply, and then click Close to exit the Smart Wizard. Setting Up WEP Encryption Security Follow the steps below to configure WEP encryption security: 1. Run the WN111v2 Smart Wizard. a. Make sure that the WN111v2 software is installed and the wireless-N USB adapter is connected to the USB port in your computer. b. Use the icon to open the Smart Wizard. The Settings tab displays. 2. Configure the Security settings. a. In the Profile field, select the profile or type in a profile name. b. In the Network Name (SSID) field, select the network, or enter the SSID. Note: You will not get a wireless network connection unless the network SSID matches exactly what is configured in the access point. 2-16 v1.0, May 2008

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
NETGEAR RangeMax Wireless-N USB 2.0 Adapter WN111v2 User Manual
2-16
v1.0, May 2008
c.
In the Security section, select
WPA-PSK [TKIP]
or
WPA2-PSK [AES]
, and enter the
passphrase.
For more about WPA2-PSK, see the link to
“Wireless Communications:” in Appendix B
.
3.
Save your settings in a profile.
a.
Click the
Save Profile
button. All the configuration settings are saved in this profile.
b.
Click
Apply
, and then click
Close
to exit the Smart Wizard.
Setting Up WEP Encryption Security
Follow the steps below to configure WEP encryption security:
1.
Run the WN111v2 Smart Wizard.
a.
Make sure that the WN111v2 software is installed and the wireless-N USB adapter is
connected to the USB port in your computer.
b.
Use the
icon to open the Smart Wizard. The Settings tab displays.
2.
Configure the Security settings.
a.
In the
Profile
field, select the profile or type in a profile name.
b.
In the
Network Name (SSID)
field, select the network, or enter the SSID.
Figure 2-13
Note:
You will not get a wireless network connection unless the network SSID
matches exactly what is configured in the access point.