Netgear WN2000RPTv2 User Guide - Page 20
Table 2., Status Settings, continued, Extender Network Settings - ip address
View all Netgear WN2000RPTv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Universal WiFi Range Extender WN2000RPT Table 2. Status Settings (continued) Field GUI Language Version Connection Status to Existing Network Name (SSID) Connection Status Link Rate Extender PC Info MAC Address IP Address DHCP Server IP Subnet Mask Gateway IP Address Domain Name Server Extender Wireless Settings Name (SSID) Region Channel Wireless AP Broadcast Name Wi-Fi Protected Setup Description The language version running on the extender. If you upgrade the firmware, this field changes. Your extender is set up to connect to this SSID, also called the wireless name. The status of your wireless connection (connected or disconnected). The actual transmission (Tx) and receive (Rx) link rate in the current wireless connection. The physical address of the extender, as seen from the local area network (LAN). The IP address of the extender. The default is 192.168.1.250. Identifies the network DHCP server on the wireless network. The IP subnet mask associated with the LAN IP address of the extender. The default is 255.255.255.0. The IP address of the wireless network gateway. The IP address of the Domain Name Server (DNS) of the wireless network. The name (SSID) or the wireless network. The location where the extender is operating. The channel of the wireless network. On or Off. On or Off. Configured. Extender Network Settings 20