Netgear WNR834Bv1 WNR834Bv1 Reference Manual - Page 27
Mode., Security Options., Wireless, Communications in Appendix B - access point
View all Netgear WNR834Bv1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
NETGEAR RangeMax™ NEXT Wireless Router WNR834B Reference Manual access point. For more information on the wireless channel frequencies, see "Wireless Communications" in Appendix B. • Mode. You can select "g and b", "Up To 130 Mbps", and "Up To 270 MBps". The "g and b" mode provides backward compatibility with the slower 802.11b wireless devices while still enabling 802.11g communications. The "Up to 130 Mbps" mode provides transmission streams that communicate at up to 130 Mbps. The "Up to 270 Mbps" mode will automatically optimize performance based on interference from other access points or clients. Note: The maximum wireless signal rate is derived from the IEEE Standard 802.11 Specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. • Security Options. These options are described below. A full explanation of these standards is available in "Wireless Communications" in Appendix B. Table 3-1. Basic Wireless Security Options Field Description None No wireless security. WEP WEP offers the following options: • Open System With Open Network Authentication and 64- or 128-bit WEP Data Encryption, the WNR834B does perform 64- or 128-bit data encryption but does not perform any authentication. • Shared Key Shared Key authentication encrypts the SSID and data. Choose the Encryption Strength (64- or 128-bit data encryption). Manually enter the key values or enter a word or group of printable characters in the Passphrase box. Manually entered keys are case sensitive but passphrase characters are not case sensitive. Note: Not all wireless adapter configuration utilities support passphrase key generation. • Auto The wireless router automatically detects whether Open System or Shared Key is used. WPA-PSK WPA-Pre-shared Key does perform authentication. WPA-PSK uses TKIP (Temporal Key WPA2-PSK Integrity Protocol) data encryption and WPA2-PSK uses AES (Advanced Encryption Standard) data encryption. Both dynamically change the encryption keys making them nearly impossible to circumvent. Enter a word or group of printable characters in the Password Phrase box. These characters are case sensitive. Note: Not all wireless adapter configuration utilities support WPA-PSK and WPA2-PSK. Furthermore, client software is required on the client. Windows XP Service Pack 2 and Windows XP Service Pack 1 with WPA patch do include the client software that supports WPA. Nevertheless, the wireless adapter hardware and driver must also support WPA. Wireless Configuration 3-7 v1.0, May 2006