Oki CX2731MFP MC361, MC561, CX2731MFP Advanced User's Guide - Page 65
Scanning, Scan to E-mail, Setting Sender and Reply To Addresses
View all Oki CX2731MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Scanning Using the Control Panel Arrow Keys When using the arrow keys, press the key repetitively to go to the selection. Scan to E-mail Note The following procedures assume that [Continuous Scan] is disabled. For the basic procedures when [Continuous Scan] is enabled, refer to the Basic User's Guide on the DVD supplied with your MFP. Setting Sender and Reply To Addresses To set the e-mail address from which e-mails are sent and the address to which responses are sent. 1 Press the key. 2 Use the down arrow key to select [Admin Setup], then press . 3 Enter the administrator password. 65 - Scanning: Scan to E-mail MC361/MC561/CX2731 MFP Advanced User's Guide
65
– Scanning:
Scan to E-mail
MC361/MC561/CX2731 MFP Advanced User’s Guide
Scanning
Using the Control Panel Arrow Keys
When using the arrow keys, press the key
repetitively to go to the selection.
Scan to E-mail
_______________
Note
The following procedures assume that [Continuous Scan] is
disabled
.
For the basic procedures when [Continuous Scan] is enabled,
refer to the Basic User’s Guide on the DVD supplied with your
MFP.
Setting Sender and Reply To Addresses
To set the e-mail address from which e-mails are sent and the
address to which responses are sent.
1
Press the <SETTING> key.
2
Use the down arrow key to select [Admin Setup], then press
<OK>.
3
Enter the administrator password.