Oki OKIPAGE10i Users' Guide for the OKIPAGE10i - Page 32

Operating Your Printer 2 Level 2 Menu Category PRPROTEK DARKNESS CONTROL POWER SAVING LOW TONER TONER SAVING Items Options Notes: Select time print job will be flushed after last print command is received. Effective in PostScript only. MANTIME 30 SEC* 60 SEC OFF Notes: Time printer will wait before flushing job when requesting manual paper input. GOOD, BETTER*, BEST Designates whether Frame Buffer compression is performed or not. Good:not performed. Better:judges data and performed. Best:performed without exceptions. Generally,the Better setting won't cause overrun. However, the Good setting in PCL6 is more efficient. DARKNESS 0, +1*, +2, -2, -1 Notes: Control print density. Negative values lighten, positive values darken. PWR SAVE 0 SEC, 8 MIN*, DISABLE Notes: 0 SEC=Reduces power consumption at end of receive time. 8 MIN=Reduces power consumption 8 minutes after printer stops receiving data, fuser heating element shuts off; 30 seconds later fan shuts off. When printer receives data, fuser warms up before printing begins. DISABLE=Fuser and fan are always on, printer is ready to print at all times. LOW TNR ON*, OFF Notes: ON=When low toner is detected, TONER LOW displays, 100 more sheets print; TONER EMPTY displays, printing stops. OFF=When low toner is detected, TONER EMPTY displays, printing stops. Install new toner cartridge to resume printing. TNR SAVE DISABLE*, MEDIUM, LIGHT Notes: Use this feature to conserve toner and reduce printing costs when you are printing rough drafts or proof copies. Medium reduces toner by 30%, light reduces toner by 50%. *Default Setting ¯22 OKIPAGE 10i User's Guide