Olympus C-7070 Zoom C-7070 Instruction Manual - Page 107

Editing still pictures 1 Turn the control dial to select the still picture you want to edit, and press Z. 2 Use the arrow pad, zoom lever and control dial to decide the trimming position and size. • Press acbd to select the trimming frame, and move the zoom lever toward W or T to decide the trimming size. • Use the control dial to select the height and width of the trimming frame. • 3:2 trimming size can be selected when the size of the selected picture is 3,072 × 2,304, or 3,072 × 2,048. GO OK Playback GO OK 3 Press Z. 4 Press ac to select the card, and press Z. 6 • If only one card is inserted, skip this step. • When there is insufficient card memory, the display returns to the setting screen. 5 Select [OK], and press Z. • The [BUSY] bar is displayed. After the image is saved, the camera returns to OK Step 1. RESET • The trimmed picture is stored as a separate picture from the original. CANCEL • If you want to trim the picture again, select [RESET] and press Z. Repeat SELECT the procedure from Step 2. • To quit the trimming function, select [CANCEL] and press Z. GO OK Note • Trimming is not possible in the following cases. Movies, pictures taken in raw data format, or when there is insufficient memory space on the card. • If a trimmed picture is printed, it may appear grainy. 107