Olympus C-7070 Zoom C-7070 Instruction Manual - Page 180

Troubleshooting Possible cause Corrective action Ref. page The picture is too dark. The flash was blocked Hold the camera correctly, keeping your by your finger. fingers away from the flash. P. 28 The subject was out of the working range of the flash. The flash is set to [$]. Shoot within the flash working range. Select a flash mode other than [$]. P. 47 P. 47 The subject was too small and was backlit. Set the flash to [#], or use spot metering mode. P. 47, 69 The sequential shooting mode was used. Higher shutter speeds are used during sequential shooting, which may result in pictures that are darker than usual. Set [DRIVE] to [o] in [MODE MENU]. P. 89 The center of the subject If the center of the subject is too bright, the is too bright. image as a whole emerges darker. Adjust the exposure compensation toward plus (+). P. 73 The aperture value is too Decrease the aperture value or set the high in A (M) mode. camera to P mode. P. 57 The shutter speed is too Reduce the shutter speed or set the camera P. 59 fast in S (M) mode. to P mode. The colors of pictures look unnatural. Indoor lighting affected Set the white balance according to the the picture's colors. lighting. P. 74 No white in the picture. Include something white in the picture, or shoot using [#]. P. 47 The white balance setting is wrong. Adjust the white balance according to the light source. P. 74 A filter was used. The image may be discolored according to the filter used. Use the one-touch white balance function. P. 76 Part of the picture is dark. The lens was partly Hold the camera correctly, keeping your blocked by your finger or fingers and the strap away from the lens. 10 the strap. P. 28 Appendix 180