Olympus C-7070 Zoom C-7070 Instruction Manual - Page 113

Playback on a TV 1 Make sure that the TV and camera are turned off. Connect the A/V OUT jack on the camera to the video input terminal on the TV using the AV cable provided with the camera. Connect to the TV's video input (yellow) and audio input (white) terminals. Playback AV cable A/V OUT jack (MONO) 2 Turn the TV on, and set it to the video input mode. • For details of switching to video input, refer to your TV's instruction manual. 3 Turn the camera on. • The last picture taken is displayed on the TV. Use the arrow pad to select the picture you want to display. TIPS 6 • You are recommended to use the optional AC adapter when playing back pictures on a TV. • The close-up playback, index display and slideshow functions can also be used on a TV screen. Note • Make sure that the camera's video output signal is the same as the TV's video signal. g"Video output selection" (P. 113) • The camera's monitor turns off automatically when the AV cable is connected to the camera. • Be sure to use the AV cable provided to connect the camera to the TV. • The picture may appear off-center on the TV screen. Video output selection You can select [NTSC] or [PAL] according to your TV's video signal type. Use this setting when playing back pictures on a TV in a foreign country. Select the [VIDEO OUT] signal before connecting the AV cable. If you select the wrong video signal type, you will not be able to play back the recorded pictures properly on the TV. 113