Olympus C-7070 Zoom C-7070 Instruction Manual - Page 150
If an error code is displayed, Monitor indication, Possible cause, Corrective action
![]() |
View all Olympus C-7070 Zoom manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
Direct printing (PictBridge) If an error code is displayed If an error code is displayed on the camera's monitor during direct print setting or printing, see the following table. For more details, refer to the printer's instruction manual. Monitor indication NO CONNECTION NO PAPER NO INK Possible cause The camera is not connected to the printer correctly. There is no paper in the printer. The printer has run out of ink. The paper is jammed. Corrective action Disconnect the camera and connect it again correctly. Load some paper in the printer. Replace the ink cartridge in the printer. Remove the jammed paper. JAMMED The printer's paper Do not reconfigure the SETTINGS CHANGED cassette has been removed or the printer configuration printer after the settings have been made. has been changed. PRINT ERROR A printer error has occurred. Turn off the camera and printer. Check the printer and remedy any problems before turning the power on again. TIPS 8 • If an error code other than those shown above is displayed, see "Error codes" (P. 174). Printing pictures 150
![](/manual_guide/products/olympus-c7070-c7070-instruction-manual-d5f61ec/150.png)