Olympus C-7070 Zoom C-7070 Instruction Manual - Page 186
Using commercially available external flashes
![]() |
View all Olympus C-7070 Zoom manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 186 highlights
Accessories (optional) Camera operations Using Microdrive may increase battery consumption. To reduce consumption of the battery, observe the following. • Whenever possible, refrain from using the monitor during shooting. • Unless there is a particular need, remove the xD-Picture Card when using Microdrive. • If nothing happens when the buttons are pressed, remove the battery, then put it back again. • If you use Microdrive when the battery power is low, the camera may not turn on. If [CARD ERROR] is displayed • If no pictures can be recorded or downloaded, run SCANDISK on a computer. g"Error codes" (P. 174) Using commercially available external flashes When selecting an external flash, use products which meet the following basic conditions. (1) Some flashes available on the market operate with a high voltage synchro terminal. If one of these is used, it may damage the camera, and/or the camera may not function normally. Contact the manufacturer of the flash you are using concerning the specifications of the flash's synchro terminal. (2) Some flashes available on the market have the polarity of the synchro terminal reversed. In this case, even if the flash is connected, it will not fire. Contact the manufacturer of the flash for more information. (3) Exposures when using an external flash require that adjustments be made on the external flash unit. If an external flash is used in the auto mode, match it with the F value and ISO settings on the camera. (4) Even if the auto F value and ISO of the external flash are set to the same conditions as those on the camera, depending on the photographic conditions, it is possible that the correct exposure may not be obtained anyway. In such a case, adjust the auto F value or ISO value on the external flash unit or calculate the distance in the manual mode and use it that way. (5) Use a flash whose illuminating angle covers the angle of view of the lens. However, in close-up photography with the lens on the wide setting, the bottom of the image may not expose correctly. The ideal is to have a wide angle adapter to fit on the flash and spread the illumination angle so it is wider. (6) Use a flash unit with a flash time of 1/200 sec. or less when using the flash at full strength. For devices with a long flash time, a portion of the light emitted will not 10 contribute to the exposure. (7) If a flash unit or other accessory TTL flash that has additional communications functions other than an Olympus FL series flash is used, it may not only fail to function normally, but may also cause damage to the camera's circuitry. Do not use such a device. Appendix 186
![](/manual_guide/products/olympus-c7070-c7070-instruction-manual-d5f61ec/186.png)