Olympus C-7070 Zoom C-7070 Instruction Manual - Page 95
Changing the time until remote control is activated, Press the, button, then press
![]() |
View all Olympus C-7070 Zoom manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Remote control shooting (optional) Note • If the remote control receiver is exposed to strong light, the effective signal distance may be reduced or shooting may not take place. • To shoot sequential shots using the remote control, press and hold the shutter button on the remote control. If the camera does not receive the remote control signal properly, sequential shooting may stop. • To view pictures using the remote control, refer to the instruction manual for the remote control. Changing the time until remote control is activated You can select the time from when the shutter button on the remote control is pressed until the picture is taken. AUTO 3SEC The picture is taken immediately when the shutter button on the remote control is pressed. The picture is taken approximately 3 seconds after the shutter button on the remote control is pressed. 5 Mode dial 1 Press the Z button, then press Z. • When [OFF] or [Y] is set, the menu cannot be displayed by pressing Z. 2 Select [AUTO] or [3SEC], and press Z. AUTO SELECT 3SEC GO OK Additional functions 95
![](/manual_guide/products/olympus-c7070-c7070-instruction-manual-d5f61ec/95.png)