Olympus C-7070 Zoom C-7070 Instruction Manual - Page 55
Using a slave flash mode, Press the, button, then press, FLASH], select, SLAVE], and press
![]() |
View all Olympus C-7070 Zoom manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Basic shooting functions Selecting the flash Note • The camera's flash mode will have no effect on the external flash. The external flash will fire even when the camera's flash mode is set to [$] (off). • Confirm in advance that the external flash you are using is synchronized with the camera. Using a slave flash mode This setting is for when using a commercially available slave flash that is 3 synchronized with the camera flash.The amount of light emitted by the flash can be adjusted in 10 levels. The flash can fire in sequential shooting mode, but the interval between shots will be longer if a high emission level is set. AUTO, ! : The setting is automatically changed to [#] (Fill-in flash). H SLOW : The setting is automatically changed to [#SLOW1]. Mode dial 1 Press the # button, then press Z. g"Direct buttons" (P. 16) 2 From [QFLASH], select [SLAVE], and press d. FLASH MODE 3 Select an emission level from [1] to [10], then press Z. FLASH SLOW SELECT IN+ SLAVE GO OK SLAVE FLASH 5 SELECT GO OK 55
![](/manual_guide/products/olympus-c7070-c7070-instruction-manual-d5f61ec/55.png)