Olympus C-7070 Zoom C-7070 Instruction Manual - Page 90

Sequential shooting Auto bracketing Mode dial Top menu [MODE MENU] [CAMERA] [DRIVE] [7] g"Menus" (P. 23) • You can also select [DRIVE] from the shortcut menu. 1 Select the exposure differential and number of shots and press BKT Z. • The differential that can be selected varies depending on the [EV STEP] setting. g"Exposure steps" (P. 122) ± 0.3 3 ± 0.7 5 ± 1.0 • In some combinations of image size and SELECT GO OK record mode, only [×3] is available. 2 5 Take the picture. • Press the shutter button fully and keep it pressed to shoot the preset number of pictures. You can stop shooting at any time by releasing the shutter button. Note • Sequential shooting ([i], [j], [k], [7]) is not possible in the following situations. When [R] is selected for the f mode, [K] is set to [TIFF] or when [NOISE REDUCTION] is set to [ON]. • [j] and [k] are not available when [K] is set to [RAW]. • In sequential shooting mode ([i], [j], [k], [7]), the built-in flash does not fire. The external flash does not fire in 7 mode. • In modes other than S and M, as the maximum shutter speed is set to 1/30 sec., adequate exposure is not obtained when shooting a dark subject. • When auto bracketing in a mode other than S mode, the camera auto brackets at a shutter speed of 1/30 sec. if the shutter speed is set longer than 1/30 sec. with an exposure differential of 0. • If the battery power is low and the battery check blinks during sequential shooting, shooting stops and the camera starts saving the pictures you have taken. Whether or not all of the shots are saved depends on how much battery power remains. • If there is not enough space available on the card for the number of frames you have set during auto bracketing, you cannot continue shooting. Additional functions 90