Olympus C-7070 Zoom C-7070 Instruction Manual - Page 156

Print settings (DPOF) 5 Press Z to complete the print reservations and return to the picture selection screen, then press Z again. 6 Press b to select [END]. • The [< PRINT ORDER] screen is displayed. Follow the operation guide to return to the playback screen. SINGLE PRINT END MORE CANCEL Note • The size of the printed picture varies depending on the printer settings. If the trimmed picture is small, printing magnification increases the picture accordingly, resulting in a printed picture with lower resolution. • For the best results with enlarged prints, you are recommended to use the [TIFF], [SHQ] or [HQ] mode. • The original picture is not trimmed. If your printer does not have the trimming function, the picture will be printed untrimmed. • Do not rotate pictures that have been trimmed. Doing so could change the cropped area. Resetting print reservation data This function allows you to reset the print reservation data for pictures stored on the card. You can reset all the print reservation data or just for selected pictures. 8 (To reset the print reservation data for all the pictures Mode dial 1 Press the < button. g"Direct buttons" (P. 16) 2 Select [RESET], and press Z. • If there is no print reservation data stored on the card, the [< PRINT ORDER] screen is not displayed. • Press b to return to the playback screen. PRINT ORDER PRINT ORDERED RESET CANCEL KEEP SELECT GO OK 156 Printing pictures