Olympus C-7070 Zoom C-7070 Instruction Manual - Page 148
Trimming, Use the arrow pad and zoom, lever to select the trimming, position and size., Press
![]() |
View all Olympus C-7070 Zoom manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
Direct printing (PictBridge) Trimming To trim a picture by [MORE] in [PRINT] or [MULTI PRINT] mode, follow the procedure below. 1 Use the arrow pad and zoom lever to select the trimming position and size. • Press acbd to move the trimming frame. • Move the zoom lever toward W or T to select the trimming size from small horizontal frame, large horizontal frame, GO OK small vertical frame, and large vertical frame. • Use the control dial to select the height and width of the trimming frame. • 3:2 trimming size can be selected when the size of the selected picture is 3,072 × 2,048. • If trimming has already been performed, the [P] screen is displayed. Select [RESET] and press Z. 2 Press Z. 3 Select [OK], and press Z. OK Saves the current trimming size. OK RESET Sets a new trimming size. → Repeat the procedure from Step 1. RESET CANCEL 8 CANCEL Cancels the current trimming SELECT setting. GO OK • Press Z to complete trimming and return to the [PRINT INFO] screen. Note • The size of the printed picture varies depending on the printer settings. If the trimmed picture is small, printing magnification increases the picture accordingly, resulting in a printed picture with lower resolution. • For the best results with enlarged prints, you are recommended to use [TIFF], [SHQ] or [HQ] mode. Printing pictures 148
![](/manual_guide/products/olympus-c7070-c7070-instruction-manual-d5f61ec/148.png)