Olympus D-490 D-490 Zoom Instruction Manual (2.6 MB) - Page 16

Inserting the SmartMedia Card Always insert a SmartMedia card (hereafter called "card") before taking pictures. 1 Make sure the power is off. • The lens barrier must be closed. • Make sure the monitor and the control panel are off. 2 2 Open the card cover. 3 Insert the card as shown in the diagram. Insert Special Function SmartMedia cards (sold separately) in the same 3 manner. • Use 3V (3.3V) cards only. 5V cards cannot be used with this system. • Olympus brand cards are Insert the SmartMedia card recommended, but nonOlympus brand cards may also be used. • When using non-Olympus brand cards, formatting in the camera is recommended (p.111~112). 4 Close the card compartment cover so it clicks into place. CAUTION • Never open the card cover, eject the card, remove the batteries, or disconnect the AC adapter while the camera power is turned on. Doing so may destroy the image data on the card. Destroyed images cannot be recovered. • The card is a precision instrument. Do not subject to it excessive force or shock. • Do not touch the gold portion of the card. 30 Setting the Date and Time If the batteries are removed from the camera or allowed to lose their charge, date and time settings will fail and must be reset. Make sure the date and time settings are correct before taking important pictures. 21 3,4 Monitor (Playback menu) [1 / 2 ] [ FAST ] No. [ F R A M E N o . ] 1. 1. '00 0:00 END CHANGE -M--D--Y- 1. 1. '00 0: 00 BACK SET OK 1 Make sure the lens barrier is 1 closed and SmartMedia is inserted, then press the monitor button. • The screen will be displayed on the monitor. 2 Press the menu button. • The playback menu will be displayed on the monitor. 3 Press the arrow pad ̅ or ̃ to move the on-screen arrow to date setting, then press ୴. • The date setting screen appears. 4 Press the arrow pad ̅ or ̃ to select how you want the date displayed: MDY (Month/Day/Year) DMY (Day/Month/Year) YMD (Year/Month/Day) After making your selection, press ୴. • The indication moves to first date value. 31 Getting Started