Olympus D-490 D-490 Zoom Instruction Manual (2.6 MB) - Page 29
One-Frame Erase
UPC - 050332130517
View all Olympus D-490 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
One-Frame Erase You may erase unwanted pictures to increase available storage space. One-frame erase cannot be used when a picture is protected, or a write-protect seal is on the card. To erase these pictures, you must cancel the protection feature or remove the write-protect seal from the card. (The write-protect seal may not be reused after it has been removed from the card.) 31 1 With the lens barrier closed, press the monitor button. • The camera turns on in playback mode. The most recent frame is displayed on the monitor. 2 Select the picture you want to erase by pressing the arrow pad. 2,4 • You may also use one-frame erase in either one-frame display (p.50) or in the indexdisplay setting (p.51~52). Monitor 3 Press the erase button. YES NO • The confirmation screen appears. • To cancel one-frame erase, press the erase button again. 4 Select "YES" with the arrow pad, then press the OK ESC ENTER OK button. • The camera beeps once and erases the picture. To erase all pictures You may also erase all pictures stored on the card at once (p.110). CAUTION • Never open the card compartment cover, eject the card, remove the batteries, or disconnect the AC adapter while erasing pictures. Doing so may destroy the image data on the card. HELP • It may take longer to erase when the "print reserve" function (p.119) has been activated on the card. 56 3 57 Playing Images Back