Olympus D-490 D-490 Zoom Instruction Manual (2.6 MB) - Page 63

Connecting your Camera to a Computer with a Computer Cable Computer Operating Environment IBM PC/AT compatibles (As of June 2000) OS : Windows 98SE/98/95/NT 4.0/2000 professional CPU : Pentium or better Available hard disk space : at least 30MB Memory : at least 32MB Serial port : Standard RS-232C interface Type : D-SUB 9-pin Monitor : 256 color or better, at least 800 × 600 dots. Using a 32000 color monitor or better is recommended. Apple Macintosh (As of June 2000) OS : Mac OS 7.6.1 ~ 9.0.4 CPU : PowerPC or later Available hard disk space : at least 30MB Memory : at least 32MB *Serial port : Printer port or modem port Monitor : 256 color or better, at least 800 x 600 dots. Using a 32000 color monitor or better is recommended. *Not available for models with USB ports such as iMac and iBook. Connecting your Camera to a Computer Use the appropriate connector to your computer. 1 Preinstall CAMEDIA Master 2.0 on your computer. • For installation details, see the CAMEDIA Master online instructions. 124 2 Make sure the power on both the computer and the camera is turned off before connecting. 3 Attach the provided RS-232C PC serial cable to the serial port (COM1 or COM2) on your computer. 4 Open the connector cover on the camera and connect the computer cable to the data input/output (I/O) terminal on the camera. 5 Turn on your computer. IBM PC/AT D-SUB 9-pin serial port Computer connector 8 RS-232C PC serial cable 64 3,5,7 Processing Photo Images with a Computer 6 Open the lens barrier of the camera. 7 Start up CAMEDIA Master 2.0. 125