Olympus E-PL2 E-PL2 Instruction Manual (English) - Page 103
Program line diagram, Exposure warning display, Shooting, Warning display, example blinking, Status
View all Olympus E-PL2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Program line diagram (P mode) In the P mode, the camera is programmed such that the aperture value and shutter speed are automatically selected according to the subject's brightness as shown below. The program line diagram varies with the type of lens mounted. When using the (14 - 42 mm F3.5 - 5.6) zoom lens (focal length: 14 mm) Program shift Aperture value Shutter speed Exposure warning display If the optimum exposure cannot be obtained when pressing the shutter button halfway, the display will blink on the LCD monitor. Shooting Warning display mode example (blinking) Status Action 60" F2.8 The subject is • Increase the ISO sensitivity. too dark. • Use the flash. P • Decrease the ISO sensitivity. The subject is • Use a commercially available ND 4000 F22 too bright. filter (for adjusting the amount of light). 11 Information 30" F5.6 The subject is • Decrease the aperture value. underexposed. • Increase the ISO sensitivity. A • Increase the aperture value. The subject is • Decrease the ISO sensitivity or use 4000 F5.6 overexposed. a commercially available ND filter (for adjusting the amount of light). The subject is • Set the shutter speed slower. 2000 F2.8 underexposed. • Increase the ISO sensitivity. S • Set the shutter speed faster. 125 F22 The subject is • Decrease the ISO sensitivity or use overexposed. a commercially available ND filter (for adjusting the amount of light). • The aperture value at the moment when its indication blinks varies with the lens type and focal length of the lens. EN 103