Olympus E-PL2 E-PL2 Instruction Manual (English) - Page 94
Monitor, indication, Possible cause, Corrective action, CANNOT PRINT
View all Olympus E-PL2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Monitor indication m Possible cause Corrective action Turn off the camera and wait for the internal temperature to cool. Internal camera temperature is too high. Please wait for cooling before camera use. The internal temperature of the camera has risen due to sequential shooting. Wait a moment for the camera to turn off automatically. Allow the internal temperature of the camera to cool before resuming operations. BATTERY EMPTY The battery is drained. Charge the battery. The camera is not connected to Disconnect the camera and NO the computer or printer correctly. connect it again correctly. CONNECTION NO PAPER NO INK There is no paper in the printer. Load some paper in the printer. The printer has run out of ink. Replace the ink cartridge in the printer. The paper is jammed. Remove the jammed paper. JAMMED 11 SETTINGS CHANGED The printer's paper cassette has been removed or the printer has been manipulated while making settings on the camera. Do not manipulate the printer while making settings on the camera. Turn off camera and printer. There is a problem with the Check the printer and remedy Information printer and/or camera. PRINT ERROR any problems before turning the power on again. Pictures recorded on other cameras may not be printed on CANNOT PRINT this camera. Use a personal computer to print. The lens is locked. Please extend the lens. The lens of the retractable lens stays retracted. Extend the lens. (P. 12) Please check the status of a lens. An abnormality has occurred between the camera and the lens. Turn off the camera, check the connection with the lens, and turn the power on again. 94 EN