Olympus E-PL2 E-PL2 Instruction Manual (English) - Page 47
Reducing camera shake the image stabilizer, I.S. 1 - case
View all Olympus E-PL2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Reducing camera shake (the image stabilizer) You can reduce the amount of camera shake that can occur when shooting in low light situations or shooting with high magnification. 1 Display the live control (P. 20) and select j the image stabilizer item using FG. WB AUTO FOCAL LENGTH INFO P 2 Select an option with HI and press Q. AUTO 50 mm 1 OFF I.S. 1 I.S. 2 I.S. 3 Image stabilizer is off. Image stabilizer is on. Image stabilization applies only to vertical (Y) camera shake. Use when panning the camera horizontally. Image stabilization applies only to horizontal (Z) camera shake. Use when panning the camera horizontally with the camera held in portrait orientation. Basic photography/frequently-used options Choosing a focal length (Micro Four Thirds/Four Thirds System lenses excluded) Use focal length information to reduce camera shake when shooting with lenses that are not Micro Four j WB Thirds or Four Thirds system lenses. AUTO 1 Select the [IMAGE STABILIZER] item AUTO in the live control (P. 20) and press the P 50 mm INFO button. 2 Use HI to choose a focus distance and press Q. • Choose a focal length between 8 mm and 1000 mm. • Choose the value that most closely matches to the one that is printed on the lens. # Caution • The image stabilizer cannot correct excessive camera shake or camera shake that occurs when the shutter speed is set to the slowest speed. In these cases, it is recommended that you use a tripod. • When using a tripod, set [IMAGE STABILIZER] to [OFF]. • When using a lens with an image stabilization function, turn off the image stabilizer function of either the lens or the camera. • You may notice an operating sound or vibration when the image stabilizer is activated. • The image stabilizer will not activate at shutter speeds of over 2 seconds. • If the internal temperature of the camera exceeds the specified temperature, the image stabilizer is deactivated and the image stabilizer icon lights red on the monitor. EN 47