Onkyo TX-8270 Owners Manual - English/Spanish/French - Page 18

> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others connecting by Wi-Fi: "Scan Networks": Search for an access point from this unit. Find out the SSID of the access point beforehand. "Use iOS Device (iOS7 or later)": Connect by sharing the iOS device's Wi-Fi settings with this unit. If you select "Scan Networks", there are a further two choices of connection method. Check the following. "Enter Password": Enter the password (or key) of the access point to connect. "Push Button": If the access point has an automatic connection button, you can connect without entering a password. 0 If the SSID of the access point is not displayed, then in the screen listing the SSIDs, select "Other..." with the A cursor on the remote controller and press ENTER, then follow the onscreen instructions. Keyboard input To switch between upper and lower case, select "A/a" on the screen and press ENTER. To select whether to mask the password with "¢" or display it in plain text, press MENU on the remote control. Pressing CLR will delete all the input characters. 0 A confirmation screen asking you to agree to the privacy policy is displayed during network setting. Select "Accept" and press ENTER to indicate agreement. ∫ 3. Multi Zone Setup Make these settings to enjoy audio in a room other than the main room (ZONE 2). ∫ 4. Audio Return Channel If you have connected a TV that supports ARC, select "Yes". This unit's ARC setting turns on and you can listen to the TV's audio through this unit. 18