Onkyo TX-8270 Owners Manual - English/Spanish/French - Page 43
Power Management
View all Onkyo TX-8270 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Auto Reconnect Pairing Information Device Status This function automatically reconnects to the BLUETOOTH wireless technology enabled device connected last when you change the input to "BLUETOOTH". "On (default value)": When this function is to be used "Off": When this function is not to be used 0 This may not work with some BLUETOOTH wireless technology enabled devices. You can initialize the pairing information saved on this unit. Pressing ENTER when "Clear" is displayed initializes the pairing information stored in this unit. 0 This function does not initialize the pairing information on the BLUETOOTH wireless technology enabled device. When pairing the unit again with the device, be sure to clear the pairing information on the BLUETOOTH wireless technology enabled device in advance. For information on how to clear the pairing information, refer to the BLUETOOTH wireless technology enabled device's instruction manual. Displays the name of the BLUETOOTH wireless technology enabled device connected to the unit. 0 The name is not displayed when "Status" is "Ready" or "Pairing". Displays the status of the BLUETOOTH wireless technology enabled device connected to the unit. "Ready": Not paired "Pairing": Pairing "Connected": Successfully connected 0 Wait for a while if "Bluetooth" cannot be selected. It will appear when the BLUETOOTH function is started up. ∫ 4. Power Management Sleep Timer Allows the unit to enter standby automatically when the specified time elapses. Select "30 minutes", "60 minutes", or "90 minutes". "Off (default value)": Does not turn the unit to standby automatically. Auto Standby This setting places the unit on standby automatically after 20 minutes of inactivity without any video or audio input. (When "USB Power Out at Standby" or "Network Standby" is on, this becomes the HYBRID STANDBY mode which reduces the increase in power consumption to a minimum.) "On": The unit will automatically enter standby mode. "AUTO STBY" lights on the display. "Off": The unit will not automatically enter standby mode. 0 "Auto Standby" is displayed on the display and TV screen 30 seconds before the Auto Standby comes on. 0 "Auto Standby" does not work when ZONE 2 is active. 0 Default values vary depending on the regions. Auto Standby in HDMI Standby Through USB Power Out at Standby Enable or disable "Auto Standby" while "HDMI Standby Through" is on. "On": Enable this function "Off": The setting will be disabled. 0 This setting cannot be set to "On" if "Auto Standby" and "HDMI" - "HDMI Standby Through" are set to "Off". Devices connected to the USB port are supplied with electricity even when this unit is in standby mode when this function is "On". (Default Value is "Off") 0 When using this feature, power consumption increases even when this unit is on standby, however, the increase in power consumption is kept to a minimum by automatically entering the HYBRID STANDBY mode, where only essential circuits are operating. En 43