Onkyo TX-8270 Owners Manual - English/Spanish/French - Page 30

> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others 1 2 3 ∫ Registering a station You can register up to 40 of your favorite radio stations. Registering After tuning into the radio station you want to register, perform the following procedure. 1. Press MEMORY on the main unit so that the preset number on the display flashes. 2. While the preset number is flashing (about 8 seconds), repeatedly press the cursor B/A buttons (b) on the remote controller to select a number between 1 and 40. 3. Press MEMORY again on the main unit to register the station. When the station is registered, the 30 preset number stops flashing. Repeat this procedure for all of your favorite radio stations. Selecting a Preset Radio Station 1. Press TUNER (a) on the remote controller. 2. Press the cursor B/A buttons (b) on the remote controller to select a preset number. Deleting a Preset Radio Station 1. Press TUNER (a) on the remote controller. 2. Press the cursor B/A buttons (b) on the remote controller to select the preset number to delete. 3. While pressing MEMORY on the main unit, press TUNING MODE to delete the preset number. When deleted, the number on the display goes off. Registering stations in the BGM buttons You can register up to 4 of your favorite radio stations to the BGM buttons on the main unit. By registering to BGM buttons, you can start reception with one press of a button. After tuning into the radio station you want to register, perform the following procedure. 1. Press and hold one of the BGM buttons 1 to 4 on the main unit. "Preset Written" is displayed on the display and the station being received is registered. If there is already a radio station registered, it is replaced. 0 Press the BGM buttons 1 to 4 to listen to the stations you have preset. If you press these buttons when the unit is in standby mode, it comes on and starts receiving the station.