Onkyo TX-8270 Owners Manual - English/Spanish/French - Page 33

> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others Multi-zone 1 2 3 Basic operations 0 If ZONE 2 is turned on when Pure Audio room, press ZONE 2 on the main unit is selected in the main room, it will twice. You can enjoy audio in the separate room automatically switch to Direct (European 4. Adjust the volume on the pre-main a by, for example, playing a Blu-ray Disc player in the main room (where this unit is models). amplifier for the separate room. b located) and listening to internet radio in Perform the following procedure when the To turn off the function: the separate room (ZONE 2). unit is on. Press the Í button while the remote c 0 DSD audio signals are not output to 1. Press REMOTE MODE ZONE 2 (a) on controller is in the mode for controlling ZONE ZONE 2 with the "NET" input selector. the remote controller. 2. Alternatively press OFF on the main unit. 0 You can only select the same inputs for the 0 The remote controller switches to the main room and separate room with the mode for controlling ZONE 2. Playing in ZONE 2 only: d "NET" or "BLUETOOTH" input selector. If 2. Face the remote controller at this unit If you turn the unit to standby during multi- you have "NET" selected in the main room and press Í (c). zone playback, the Z2 indicator is dimmed and then select "BLUETOOTH" in the The "Z2" indicator on the display lights. and the playback mode is switched to separate room, the main room also playback in a separate room only. Turning switches to "BLUETOOTH". You cannot ZONE 2 on while the unit is in standby also select different stations for the main room switches the playback mode to playback in and separate room with the DAB a separate room only. (European models)/AM (North American 3. Press the input selector (d) of the input models)/FM radio. you want to play in the separate room. To return the remote controller to 0 If ZONE 2 is on, power consumption 0 On the main unit, after pressing ZONE main room control mode: Press during standby becomes larger than 2, within 8 seconds turn the INPUT REMOTE MODE MAIN (b) on the normal. Furthermore, RI linking features dial to select the input to be played in remote controller. do not work. the separate room. To play the same source in the main room and separate En 33