Onkyo TX-SR602 Owner Manual - Page 43
Component Video Setup
View all Onkyo TX-SR602 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
59/3 @&OCPPL 1BHF 5VFTEBZ 4FQUFNCFS 1. First Time Setup-Continued Component Video Setup If you connect to a COMPONENT VIDEO IN, you must assign it to an input selector. For example, if you connect your DVD player to COMPONENT IN 3, you should assign it to the DVD input selector. For the TX-SR702/702E, TX-SR602E, and Australian TX-SR602, if you want to output composite and S-Video sources from the COMPONENT VIDEO OUT, select Video, as explained below. Input selector Analog audio input (fixed) COMPONENT VIDEO IN jack DVD DVD IN 1 VIDEO 1 VIDEO 1 * VIDEO 2 VIDEO 2 * VIDEO 3 VIDEO 3 * VIDEO 4 VIDEO 4 * *On the TX-SR702/702E, TX-SR602E, and Australian TX-SR602, the default setting is Video. For other models, the default setting is Last. 1 RECEIVER Press the [RECEIVER] button followed by the [SETUP] button. The main menu appears onscreen. 4 ENTER 5 Use the Up and Down [ ]/[ ] buttons to select an input selector, and then use the Left and Right [ ]/[ ] buttons to select: IN1: Use the video component connected to COMPONENT VIDEO IN 1. IN2: Use the video component connected to COMPONENT VIDEO IN 2. IN3: Use the video component connected to COMPONENT VIDEO IN 3. Video*: Output composite video and S-Video sources from the COMPONENT VIDEO OUT. Last: Select this for audio-only components. * TX-SR702/702E, TX-SR602E, and Australian TX-SR602 only. Press the [SETUP] button. The setup menu closes. 2 ENTER ENTER Use the Up and Down [ ]/[ ] buttons to select "1. Initial Setup," and then press [ENTER]. The initial Setup menu appears. Notes: • If you select Last, the video source remains the same when you select another input selector. For example, if you set VIDEO 1 to Last, select the DVD input selector, then select the VIDEO 1 input selector, you can watch a DVD while listening to audio from the component connected to the VIDEO 1 IN L/R jacks. • This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button. 3 ENTER ENTER Use the Up and Down [ ]/[ ] buttons to select "2. Component Video," and then press the [ENTER] button. The Component Video Setup menu appears. Menu Ba1s.iIcniSteitaulpSetup 1-.-I-n-i-t-i-a-l--S-e-t-u-p---------- 21.1-S.2pD.eiCagokimetpraolnSeeIntntuppuVtideo -2-.-C-o-m-p-o-n-e-n-t--V-i-d-e-o------- Adv3aa..nHDcaVerDdd/wMSaUerLteTuIpSCeHtup:IN1 34..bSA.uuVrdIriDooEuOnA1ddjSuesttup :Video 5.cL.iVsItDeEnOi2ng Mode :PVriedseeot 6.dP.rVeIfDeErOe3nce :Video e.VIDEO4 :Video 43