Onkyo TX-SR602 Owner Manual - Page 89
Using Macros
View all Onkyo TX-SR602 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
59/3 @&OCPPL 1BHF 5VFTEBZ 4FQUFNCFS 1. Controlling Other Components-Continued Using Macros With the Macro function, you can program the remote controller's MACRO buttons to perform a sequence of actions with just one button press. For example, normally you need to perform the following actions to play a CD: 1. Press the REMOTE MODE CVUUPO to select Receiver mode. 2. Press the [ON] button to turn on the AV receiver. 3. Press the [CD] INPUT SELECTOR button to select the CD input source. 4. Press the REMOTE MODE [CD] button to select the CD remote controller mode. 5. Press the Play [ ] button to start playback on the CD player. With the Macro function, you can program one of the MACRO buttons to perform all five actions in one go. Making Macros There are three MACRO buttons, and each button can be programmed with a different macro in each remote controller mode. Each macro can perform up to eight actions. 2 On the remote controller, press the buttons whose actions you want to program into the macro in the order you want them per- formed. For example, to program the previous CD example into a macro, press the fol- lowing buttons: REMOTE MODE [RECEIVER], [ON], INPUT SELEC- TOR [CD], REMOTE MODE [CD], Play [ ]. 3 When you've finished, press the MACRO button again. Notes: • If after programming a macro you teach one of the buttons in that macro a new command, then the macro will no longer work properly. In this case, you must program the macro again. Running Macros Programmed macros can be run as follows. 1 Press the MACRO [1], [2], or [3] button. The actions in the macro are performed in the order in which they were pro- grammed. 1 1 1 While holding down the REMOTE MODE button for the mode that you want to learn the macro, press MACRO button [1], [2], or [3]. The Remote indicator lights up. 89