Onkyo TX-SR602 Owner Manual - Page 44

59/3 @&OCPPL 1BHF  5VFTEBZ 4FQUFNCFS 1. First Time Setup-Continued Minimum Speaker Impedance (not American models) This setting is not set automatically by the Automatic Speaker Setup function (see page 39). If the impedance of any of the connected speakers is 4 ohms or more, but less than 6 ohms, set the Minimum Speaker Impedance to "4 ohms." Note: Before you change this setting, turn down the volume. 1 2, 3 2-4 1, 5 2 ENTER Use the Up and Down [ ]/[ ] buttons to select "1. Initial Setup," and then press [ENTER]. The Initial Setup menu appears. ENTER 3 ENTER ENTER 4 ENTER 5 Use the Up and Down [ ]/[ ] buttons to select "3. Hardware Setup," and then press [ENTER]. The Hardware Setup menu appears. Menu Ba1s.iIcniSteitaulpSetup 1-.-I-n-i-t-i-a-l--S-e-t-u-p---------- 21.1-S.3pD.eiHagakiretdrawlaSreIetnupSpuettup -2-.-C-o-m-p-o-n-e-n-t--V-i-d-e-o------- Adv3aa..nHPcaoerwddewrSaeerdteuZpSoenteu2p 34..SAuurdrioounA:ddNjoSutesttAucptivated 5.bL.iSspteInmipnegdaMnocdee MPirneismeutm 6.Preference :6ohms c.TV Format :NTSC d.AM Frequency Step : 9kHz (Menus vary depending on country.) Use the Up and Down [ ]/[ ] buttons to select "b. Sp Impedance Minimum," and then use the Left and Right [ ]/[ ] buttons to select: 4 ohms: Select if the impedance of any connected speaker is 4 ohms or more, but less than 6 ohms. 6 ohms: Select if the impedances of all connected speakers are between 6 and 16 ohms. Press the [SETUP] button. The setup menu closes. 1 RECEIVER Press the [RECEIVER] button followed by the [SETUP] button. The main menu appears onscreen. Notes: • This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button. 44