Onkyo TX-SR602 Owner Manual - Page 61

59/3 @&OCPPL 1BHF  5VFTEBZ 4FQUFNCFS 1. Basic Operation-Continued The following table lists all the listening modes and shows which modes can be selected for each input signal format. Input signal format Analog, PCM*1 Dolby D */2 2/0 1/0,1+1 Other */2 Listening mode Source CD, TV, LD, VHS, MD, turntable, radio, cassette, DTV, etc. DVD, DTV, etc. Pure Audio ❍ ❍ ❍ ❍ ❍ ❍ Direct ❍ ❍ ❍ ❍ ❍ ❍ Stereo ❍ ❍ ❍ ❍ ❍ ❍ Mono ❍ ❍ ❍ ❍ ❍ ❍ PLIIx Movie/Music/Game *4 ❍ ❍ Neo:6 Cinema ❍ ❍ Neo:6 Music *5 ❍ ❍ Dolby D ❍ ❍ Dolby D EX *6 ❍ Dolby D+PLIIx Movie *7 ❍ Dolby D+PLIIx Music *6 ❍ DTS, DTS 96/24 ❍ DTS+Neo:6 *6 ❍ DTS+Dolby EX *6 ❍ DTS+PLIIx Movie *7, Music *6 ❍ DTS-ES Discrete *6 DTS-ES Matrix *6 Multich Multich+Dolby EX *6 Multich+PLIIx Movie *7, Music *6 *9 PLIIx+THX Cinema *4 ❍ ❍ *9 Neo:6+THX Cinema ❍ *9 THX Cinema ❍ ❍ ❍ *9 THX SurrEX *6 ❍ ❍ *9 PLIIx+THX Cinema *7 ❍ ❍ *9 DTS+Neo:6+THX Cinema *6 ❍ *9 DTS-ES+THX Cinema *6 Mono Movie Enhance Orchestra Unplugged ❍ ❍ ❍ ❍ ❍ ❍ Studio-Mix TV Logic All Ch Stereo ❍ ❍ ❍ ❍ ❍ ❍ Full Mono ❍ ❍ ❍ ❍ ❍ ❍ Theater-Dimensional ❍ ❍ ❍ ❍ ❍ ❍ DTS/DTS 96/24*2 2/0 1/0, 1+1 Other DTS- Multich ES DVD, LD, CD, etc. DVD ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍*3 ❍ ❍ ❍ ❍ ❍*3 ❍ ❍ ❍ ❍ ❍*8 Discrete Matrix ❍ ❍*3 ❍*3 ❍ ❍ ❍*8 ❍*3 ❍*3 ❍*3 ❍ ❍ ❍ ❍ ❍ ❍*3 ❍ ❍ ❍ ❍ ❍*3 ❍ ❍ ❍ ❍ ❍*3 ❍ ❍ ❍ ❍ ❍*3 1. In the Pure Audio and Direct listening modes, PCM signals at 32 kHz, 44.1 kHz, and 48 kHz are processed at 64 kHz, 88.2 kHz, and 96 kHz respectively. 96 kHz signals are processed at 48 kHz for all listening modes other than Pure Audio, Direct, and Stereo. 2. In the Pure Audio, Direct, Stereo, and DTS 96/24 listening modes, signals are processed as DTS 96/24. Everything else processed as DTS. 3. TX-SR702E only. 4. If the SurrBack parameter is set to "None," or the Zone 2 speakers are being used, PLII is used. 5. Available only when Surround speakers are connected. 6. Cannot be selected if the SurrBack parameter is set to "None" or the Zone 2 speakers are being used. 7. Cannot select if the SurrBack ch setting is not set to "2ch," or the Zone 2 speakers are being used. 8. If the SurrBack setting is set to "None," or the Zone 2 speakers are being used, DTS is used. 9. TX-SR702/702E only. 61