Optoma WU1500 User manual - Page 45
Serial Port Baud Rate, Serial Port Echo
View all Optoma WU1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
USING THE PROJECTOR Communications menu PICTURE OUTPUT SETUP Communications LAN WLAN Network Serial Port Baud Rate Serial Port Echo Serial Port Path Projector Address 19200 Off RS232 0 OPTION LAN Configure the local area network (LAN) settings. DHCP: Turn the DHCP ON/OFF. IP Address: Select an IP address. Subnet Mask: Select subnet mask number. Default Gateway: Select the default gateway of the network connected to the projector. MAC Address: Display the network MAC Address value. WLAN Apply: Apply Network settings. Configure the wireless local area network (WLAN) settings. Enable: Enable/Disable WLAN. Start IP: Start of IP Address. End IP: End of IP Address. Subnet Mask: Assign Network Subnet Mask. Default Gateway: Assign Network Default Gateway. MAC Address: Display network MAC Address value. SSID: Assign Network Service Set Identifier. Network Configure the general network settings. Projector Name: Display the projector hostname for Network. Restart Network: Restart the network. Network Factory Reset: Perform factory reset on the network settings. The Projector Name, LAN IP, WLAN IP, and SNMP settings will be reset Serial Port Baud Rate Select the serial port and baud rate. Serial Port Echo Control whether the serial port echoes characters. Serial Port Path Select the serial port path from either RS232 or HDBaseT. English 45