Optoma WU1500 User manual - Page 73

ADDITIONAL INFORMATION Warning indicators When the warning indicators (see below) light up or flash, the projector will automatically shutdown: ‡‡ Both "Lamp 1" LED or "Lamp 2" LED indicators (green and red) light up. This indicates the lamp 1 or lamp 2 time has expired and lamp should be replaced. ‡‡ "Lamp 1" LED or "Lamp 2" LED indicator is flashing red. This indicates the lamp 1 or lamp 2 failed to strike after 5 attempts or the lamp 1 or lamp 2 has unexpectedly shut down. The system goes to cooling state. ‡‡ "Status" LED, "Lamp 1" LED and "Lamp 2" LED indicators are lit red. This indicates the projector has overheated. Under normal conditions, the projector can be switched back on. Unplug the power cord from the projector, wait for 30 seconds and try again. If the warning indicator light up or flash, please contact your nearest service center for assistance. LED lightning messages Message Shutter LED Green Color wheel unexpectedly Stop Lamp1 time has expired and lamp should be replaced Lamp1 is on and operating correctly Lamp1 is switching on Failed to strike lamp1 after 5 attempts (strike attempts will stop) Lamp1 has unexpectedly shut down (system goes into cooling down state) Lamp1 driver communication fail Lamp2 time has expired and lamp should be replaced Lamp2 is on and operating correctly Lamp2 is switching on Failed to strike lamp2 after 5 attempts (strike attempts will stop) Lamp2 has unexpectedly shut down (system goes into cooling down state) Status LED Green Red Lamp 1 LED Green Red Lamp 2 LED Green Red Flashing Flashing Flashing Flashing On On On Flashing Flashing Flashing On On On On Flashing Flashing Flashing English 73