Panasonic AW-HE42 Operating Instructions - Page 129
continued, Camera control [Camera Control], Low light compensation [Low Light Compensation]
View all Panasonic AW-HE42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Web camera functions (continued) Camera control [Camera Control] Zoom [Zoom] This allows you to enlarge (zoom in) and reduce (zoom out) images. Setting range: 1 (wide end) to 2731 (optical telephoto end) Focus [Focus] The lens focus can be adjusted manually. Setting range: 1 (Near) to 2731 (Far) ●● This cannot be controlled when the focus mode is "Auto". ●● If this item is set to auto mode, the focus mode is set as "Auto". Also, if auto mode is canceled, the focus mode is set as "Manual". Exposure [Exposure] This allows you to set the shutter speed in the same way as when "Step" is selected in the "Shutter Mode" item of the camera menus and Web settings. Setting value: [When 59.94 Hz has been set as the unit's frequency] [When 50 Hz has been set as the unit's frequency] -13 1/10000 1/10000 -12 1/4000 1/4000 -11 1/2000 1/2000 -10 1/1000 1/1000 -9 1/500 1/500 -8 1/250 1/250 -7 1/100 1/120 -6 Off Off ●● If this item is set to auto mode, the lens iris is set to automatic adjustment and "Contrast Mode" of the camera menus and Web settings is set to "Auto". If auto mode is canceled, the lens iris is set to manual adjustment and "Contrast Mode" of the camera menus and Web settings is set to "Manual". ●● This cannot be controlled when the lens iris is set to automatic adjustment. ●● If the shooting mode (scene) is set to "Full Auto", even if this setting is changed, the change will not be reflected on the unit. ●● The settings of the auto mode of [Exposure] and [Aperture (Iris)] are linked. The settings are in accordance with the auto mode set last. Aperture (Iris) [Aperture (Iris)] The lens iris can be adjusted manually. Setting range: 1 (minimum) to 2731 (open) ●● If this item is set to auto mode, the lens iris is set to automatic adjustment and "Contrast Mode" of the camera menus and Web settings is set to "Auto". If auto mode is canceled, the lens iris is set to manual adjustment and "Contrast Mode" of the camera menus and Web settings is set to "Manual". ●● This cannot be controlled when the lens iris is set to automatic adjustment. ●● The setting may be configured with a value that is ten times larger depending on the communication software used. ●● If the shooting mode (scene) is set to "Full Auto", even if this setting is changed, the change will not be reflected on the unit. ●● The settings of the auto mode of [Exposure] and [Aperture (Iris)] are linked. The settings are in accordance with the auto mode set last. Pan [Pan] The camera can be panned left or right. Setting range: -175 to +175 (1° increments) ●● The movement speed can be changed in "Preset Speed Table"/"Preset Speed" of the camera menus and Web settings. Notes ●● After connecting via USB, do not change "Install Position". Operation will be in the opposite direction. ●● The default setting may be possible but panning of the unit may not be able to be controlled depending on the communication software. Tilt [Tilt] The camera can be tilted up or down. Setting range: -30 to +90 (1° increments) ●● The movement speed can be changed in "Preset Speed Table"/"Preset Speed" of the camera menus and Web settings. Note ●● After connecting via USB, do not change "Install Position". Operation will be in the opposite direction. Roll [Roll] This is not supported by this unit. Low light compensation [Low Light Compensation] This is not supported by this unit. 129