Panasonic AW-HE42 Operating Instructions - Page 34
What to do when encountering problems in the basic shooting operations
![]() |
View all Panasonic AW-HE42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
What to do when encountering problems in the basic shooting operations If the trouble is not resolved by taking the action suggested below, refer to "Troubleshooting" (page 139). When performing the operations using the wireless remote control The unit does not move. ●● Press the [CAM1], [CAM2], [CAM3] or [CAM4] button to select the unit which is to be operated. If only one unit is being used, it is normally selected using the [CAM1] button. ●● Check that the IR ID has been set correctly. (page 60, page 99) ●● If the unit's status display lamp is off or lights up orange, it means that the unit's power is not on. Refer to "Turning the power on" (page 29), and turn on the power. ●● If the unit's status display lamp does not blink even when the wireless remote control is operated near the unit's wireless remote control signal light-sensing area, it means that the wireless remote control's batteries have run down. Replace the batteries. Multiple color bands (color bars) are displayed. Press the [MODE] button to switch to the camera picture. The menu screen is displayed. Press the [MENU] button for 2 seconds to exit the camera menu. The lens focus is not adjusted automatically. Press the [A/FOCUS] button to switch to auto focusing. When performing the operations using the controller The unit does not move. ●● Select the unit to be operated by following the procedure below. When using an AW-RP50: Refer to the Operating Instructions of the controller. ●● If the unit's status display lamp is off or lights up orange, it means that the unit's power is not on. Refer to "Turning the power on" (page 29), and turn on the power. Multiple color bands (color bars) are displayed. Press the [BARS] button to switch to the camera picture. The menu screen is displayed. Press the [CAMERA OSD] button to exit the camera menu. The lens focus is not adjusted automatically. Press the [AUTO] button for focus control to switch to auto focusing. The camera picture is too light or too dark. ●● Press the [AUTO] button for IRIS to switch to auto lens iris adjustment. ●● Press the [AUTO] button for GAIN to switch to auto gain adjustment. The camera picture is too light or too dark. 1. Press the [A/IRIS] button to switch the lens iris adjustment to auto. 2. Press the [AUTO] button of [GAIN] to switch the gain adjustment to auto. Something is wrong with the coloring of the camera pictures. Refer to "Auto tracking white adjustment (ATW)" (page 41), and switch to "ATW". Something is wrong with the coloring of the camera pictures. Refer to "Auto tracking white adjustment (ATW)" (page 41), and switch to "ATW". 34
![](/manual_guide/products/panasonic-awhe42-operating-instructions-a78acf8/34.png)