Panasonic AW-HE42 Operating Instructions - Page 87
Notes, Audio, Input Volume, Plugin Power, Equalizer, Audio over IP, Audio Transmission, Audio bit rate
View all Panasonic AW-HE42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
Web screen configurations (continued) Audio tab [Audio] Configure audio settings. Notes ●● Images and audio are not synchronized. Therefore, images and audio may be slightly out of sync. ●● The audio may skip depending on the network environment. zzAudio Audio Enable/disable the audio input signal from the device connected to the audio input connector. Factory settings: Off Input Volume Set the volume of the audio from the unit when listening to it on the personal computer. Setting value: Mic High Set the volume to high. Use this when audio is input to the camera via a microphone. Mic Middle Set the volume to medium. Use this when audio is input to the camera via a microphone. Mic Low Set the volume to low. Use this when audio is input to the camera via a microphone. Line High Set the volume to high. Use this when audio is input to the camera via line input. Line Middle Set the volume to medium. Use this when audio is input to the camera via line input. Line Low Set the volume to low. Use this when audio is input to the camera via line input. Factory settings: Line Middle Plugin Power Turn plug-in power Off/On. Factory settings: Off ALC Turn automatic level adjustment for the audio Off/On. Factory settings: On Equalizer Set the equalizer function. Setting value: Off Do not use the equalizer function. Low Cut Cut low frequencies to reduce the noise of an air-conditioning unit, projector, or other equipment. Speech Cut low frequencies and high frequencies to Enhancement enhance the clarity of speech. Factory settings: Off zzAudio over IP Audio Transmission Set the communication mode used to transmit audio data to a personal computer, etc. Setting value: Off Do not transmit audio data. All settings and controls related to audio will be disabled. On Transmit audio data. This allows audio as well as images to be viewed on the personal computer. Factory settings: On Audio bit rate Set the bit rate for transmitting audio. Setting value: 64kbps, 96kbps, 128kbps Factory settings: 128kbps 87