Panasonic AW-HE42 Operating Instructions - Page 82
Image capture size, Transmission priority, Frame rate, Notes, Max bit rate per client, Setting value
View all Panasonic AW-HE42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Web screen configurations (continued) Image capture size Select the resolution for H.264 images. Selectable options will vary depending on the selected resolution setting. Setting value: H.264(1) 1920×1080 1280×720 640×360 (when HDR is "Low" or "High") H.264(2) 1280×720 640×360 320×180 H.264(3) 1280×720 640×360 320×180 H.264(4) 1280×720 640×360 320×180 Note ●● When the Priority Mode (page 56, page 77) selection is "NDI|HX", the following settings will be available. H.264(1): 1920×1080, 1280×720 H.264(2): 640×360 Transmission priority Set the transmission mode for H.264 images. Setting value: Constant bit rate Transmits H.264 images at the bit rate specified in [Max bit rate (per client)]. ●● The "Frame rate" value is automatically determined (as 5fps to 30fps or 5fps to 25fps) according to the selected bit rate. (page 83) Frame rate Transmit H.264 images at the frame rate specified in [Frame rate]. ●● Set the frame rate and bit rate and transmit. (page 83) Best effort Transmit H.264 images at a variable bit rate between the maximum and minimum specified in [Max bit rate (per client)], according to the network bandwidth. ●● Depending on how the bit rate is changed, the "Frame rate" value is automatically determined (as 5fps to 30fps or 5fps to 25fps). (page 83) Factory settings: Frame rate Note ●● When the Priority Mode (page 56, page 77) selection is "NDI|HX", this item is fixed to "Frame rate". Frame rate Set the frame rate for H.264 images. Setting value: For 59.94Hz: 5fps, 15fps, 30fps, 60fps For 50Hz: 5fps, 12.5fps, 25fps, 50fps Factory settings: For 59.94Hz: 30fps For 50Hz: 25fps Notes ●● When 1920×1080/60fps or 1920×1080/50fps is used, the setting becomes only H.264(1). ●● When setting 1920×1080/60fps or 1920×1080/50fps, set H.264(4) to "Off", and set the maximum value of "Max bit rate (per client)" to 16384kbps to 24576kbps. ●● When the image resolution is "640×360" or "320×180", 60fps or 50fps cannot be selected for the frame rate. Max bit rate (per client)* Specify the H.264 bit rate per client. When [Transmission priority] is set to [Best effort], specify the maximum and minimum bit rate. Setting value: 512kbps, 768kbps, 1024kbps, 1536kbps, 2048kbps, 3072kbps, 4096kbps, 6144kbps, 8192kbps, 10240kbps, 12288kbps, 14336kbps, 16384kbps, 20480kbps, 24576kbps * The H.264 bit rate is limited by the [Bandwidth control (bitrate)] (page 105) setting under the [Network] tab of the network setup screen [Network]. The actual bit rate may be lower than the specified value. 82