Panasonic AW-HE42 Operating Instructions - Page 39
White balance adjustment
View all Panasonic AW-HE42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
White balance adjustment ■■White balance adjustment In order for the white to be reproduced accurately, the ratio between the three primary colors (RGB) is adjusted. If the white balance has shifted out of adjustment, not only will the white be reproduced poorly but the color tones of the entire screen will also be degraded. ●● This adjustment must be performed when using the unit for the first time or when the unit has not been used for a prolonged period. ●● It must be performed when the lighting conditions or brightness has changed. As the type of adjustment used, AWB (automatic white balance adjustment) which is used to adjust the white balance when the [AWB] button on the controller is pressed, ATW (automatic tracking white balance adjustment) which is used to keep adjusting the white balance at all times, or manual adjustment can be selected. The results of the AWB adjustment can be stored in two memories, A and B, when "AWB A" or "AWB B" has been selected for the white balance. ●● Once the white balance values have been adjusted, their setup procedure will be completed simply by selecting them using the camera menus or web settings, or by pressing the buttons on the controller, provided that they are going to be used under the same conditions as the ones established when the values were set. There is no need to set it again. ●● Once a new setting is entered, the previous setting will be erased. Use the two memories to store settings corresponding to different shooting conditions. Note ●● When Shooting mode (Scene) on the AW‑HE42 is set to "Full Auto", the white balance cannot be manually adjusted (ATW mode is activated). For details, refer to "Selecting the shooting modes (scene files)" (pages 31 to 32). ●●Automatic adjustment (AWB: AWB A or AWB B) When performing the operations using the wireless remote control 1 Shoot a white subject (such as a white wall or handkerchief) so that it fills the screen. ●● Do not shoot shiny or very bright objects. ●● Steps 2 through 8 represent the procedure for selecting the "AWB A" or "AWB B" memory. They need not be taken if a selection has already been made. 2 Select Manual1, Manual2 or Manual3 as the shooting mode by following the procedure in "Selecting the shooting modes (scene files)" (page 32). ** Camera ** Scene Contrast Picture Matrix Manual1 Return 3 Press the [▲] or [▼] button to bring the cursor to "Picture". 4 Press the [○] button. The "Picture 1/3" sub‑menu is displayed. *** Picture 1/3 *** Chroma Level White Balance Mode Color Temperature R Gain B Gain Pedestal 0 VAR 3200K 0 0 0 Return 39