Panasonic DMC-G1K Digital Still Camera - Page 68

Taking Pictures with the Self-timer, Set the drive mode lever

Page 68 highlights

Advanced (Recording pictures) [REC] mode: Taking Pictures with the Self-timer Set the drive mode lever to [ë]. A Press the shutter button halfway to focus and then press it fully to take the picture. A When self-timer is set to [ ]. • A picture is not taken until the subject is brought into focus. • If you want to press the shutter button fully to take a picture even when the subject is not focused, set [FOCUS PRIORITY] in the [CUSTOM MENU] menu to [OFF]. (P107) • The self-timer indicator B blinks and the shutter is activated after 10 seconds (or 2 seconds). • If you press [MENU/SET] while taking a picture with the self-timer, it is canceled. • When [ ] is selected, the self-timer indicator blinks again after the first and the second pictures are taken and the shutter is activated 2 seconds after it blinks. ∫ Changing the time setting for the self-timer 1 Select [SELF-TIMER] in the [REC] mode menu. (P27) 2 Press 3/4 to select the mode and then press [MENU/SET]. Item Settings 10 seconds 10 seconds/3 pictures 2 seconds • If you set [ ], after 10 seconds the camera takes 3 pictures at about 2 second intervals. 3 Press [MENU/SET] to close the menu. • You can also press the shutter button halfway to close the menu. Note • When using a tripod etc., setting the self-timer to 2 seconds is a convenient way to avoid the jitter caused by pressing the shutter button. • We recommend using a tripod when recording with the self-timer. • Depending on the recording conditions, the recording interval may become more than 2 seconds when [ ] is selected. • The flash output may not be constant when [ ] is set. • Operation will be same as [ ] even if it is set to [ ] while multi film bracket recording (P83). • Self-timer cannot be set to [ ] or [ ] in Intelligent auto mode. 68 VQT1U32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168

VQT1U32
68
Advanced (Recording pictures)
[REC] mode:
Taking Pictures with the Self-timer
Set the drive mode lever to [
ë
].
Press the shutter button halfway to focus
and then press it fully to take the picture.
A
When self-timer is set to [
].
A picture is not taken until the subject is brought into
focus.
If you want to press the shutter button fully to take a
picture even when the subject is not focused, set
[FOCUS PRIORITY] in the [CUSTOM MENU] menu to [OFF]. (P107)
The self-timer indicator
B
blinks and the shutter is activated after
10 seconds (or 2 seconds).
If you press [MENU/SET] while taking a picture with the self-timer, it is
canceled.
When [
] is selected, the self-timer indicator blinks again after the
first and the second pictures are taken and the shutter is activated
2 seconds after it blinks.
Changing the time setting for the self-timer
1
Select [SELF-TIMER] in the [REC] mode menu. (P27)
2
Press
3
/
4
to select the mode and then press [MENU/SET].
If you set [
], after 10 seconds the camera takes 3 pictures at about 2 second intervals.
3
Press [MENU/SET] to close the menu.
You can also press the shutter button halfway to close the menu.
Note
When using a tripod etc., setting the self-timer to 2 seconds is a convenient way to avoid the
jitter caused by pressing the shutter button.
We recommend using a tripod when recording with the self-timer.
Depending on the recording conditions, the recording interval may become more than
2 seconds when [
] is selected.
The flash output may not be constant when [
] is set.
Operation will be same as [
] even if it is set to [
] while multi film bracket recording (P83).
Self-timer cannot be set to [
] or [
] in Intelligent auto mode.
Item
Settings
10 seconds
10 seconds/3 pictures
2 seconds
A