Panasonic DP-190 Operating Instructions - Page 37
General Settings For Key Operator Continued - network setup
View all Panasonic DP-190 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
■ General Settings (For Key Operator) (Continued) Function No. Modes 11 ORIG. SET BEEP ADF Function Selects whether to enable the sound when paper is placed on the ADF. 1:INVALID / 2:VALID Initial Setting 2:VALID 13 DEPT. COUNTER MODE Monitors the copy usage of each department. 1: TOTAL COUNTER 2: DEPT. COUNTER 3: DEPARTMENT LIST Consult your authorized service provider 16 LANGUAGE PRIORITY Selects whether to enable the language selection 1:OFF menu to display when the machine comes out of the Energy Saver Mode, or when the RESET button is pressed once. 1:OFF / 2:ON 17 DATE & TIME Sets the date and time. Month, Day, Year, Time Input the date and time using the Cursor Keys and the Keypad. 18 DAYLIGHT TIME 19 IP ADDRESS (DHCP)*1,*2 Selects whether to enable the daylight time feature. 2:VALID 1:INVALID / 2:VALID Displays the address which was reserved by DHCP server. 20 SUBNET MASK (DHCP)*1,*2 21 DEF. G/W IP (DHCP)*1,*2 22 DHCP DEFAULT*4 Displays the address which was reserved by DHCP server. Displays the address which was reserved by DHCP server. Selects whether to enable the DHCP. 1:INVALID / 2:VALID 2:VALID 23 DNS SERVER ADDR*2 24 MAC ADDRESS 25 HARD DISK FORMAT*3 26 HARD DISK ERR CHK*3 27 ABBR GROUP ID 28 COMMUNITY NAME(1)*2 Selects whether to enable the DNS Server, and 2:VALID sets its settings for Internet Fax/Email Function. 1:INVALID 2:VALID 1:HOST NAME / 2:DOMAIN NAME / 3:PRI. DNS SERVER (IP ADDRESS1) / 4:SEC. DNS SERVER (IP ADDRESS2) Indicates the MAC address. Formats the hard disk. Selects the provision for the hard disk error check. Inputs the group ID for the address book. 0 0-99 Selects whether to change the Community Name(1) SNMP. Enables read only. public 29 COMMUNITY NAME(2)*2 Selects whether to change the Community Name(2) SNMP. Enables read/write. public NOTE *1 When setting other than DHCP server Network settings, Parameter No. "22 DHCP DEFAULT" should be set to "INVALID" first, then setup Parameter No.19 to 21. *2 When Parameter No.19 to 23 (except 22) and No. 28, 29 are set, cycle the power by turning the Power Switch on the Left Side of the machine OFF and ON. *3 Available only when the optional Hard Disk Drive Unit is installed. *4 When not connecting to LAN, the setting of DHCP should be on INVALID. When the setting of DHCP is on VALID, and the machine is in Shutdown Mode, the machine will not answer an incoming Fax call. 37