Panasonic DP-190 Operating Instructions - Page 44
Department Counter, Network Settings, For ID Identification Code, For Maximum Copies - set ip address
View all Panasonic DP-190 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Function For Example ■ Department Counter The Department Counter feature can limit the number of copies, administer counters and Identification Code numbers for each department. (Maximum Number of Departments: 50) Contact your authorized service provider to enable the Department Counter feature. 1 2 3 FUNCTION MODE (1-2) ENTER NO. OR ∨ ^ If set in other function mode 7 KEY OPR. MODE (00-31) ENTER NO. OR ∨ ^ 8 13 DEPT. COUNTER MODE 1: TOTAL COUNTER or 1: General Settings or 13 (DEPT. COUNTER MODE) 11 For Department Counter DEPT. COUNTER 01:123145 For Maximum Copies MAX COPIES 01:12345678 For ID (Identification) Code ID CODE 01:12345678 Clear the counter to "0". ■ Network Settings When the Parameter No. "22 DHCP DEFAULT" is set to "INVALID", the Key Operator must administer the following Network settings manually. Enter these required Network setting: 19 (TCP/IP ADDRESS), 20 (TCP/IP SUBNET MSK) and 21 (TCP/ IP G/W ADDR), in the same manner as shown in the following example. Maximum number of Copies (8-digit) ID Code (1 to 8-digit) 1 Same procedure as in steps 1 to 6 above. 5 19 TCP/IP ADDRESS 44 19 TCP/IP ADDRESS 192.168.1.100 Input the TCP/IP Address Ex.: 192.168.1.100 Use the " " key to enter a period. 1→9→2→ →1→6→8→ →1→ →1→0→0 6 20 TCP/IP SUBNET MSK Input Subnet Mask; same procedure as step 5.