Panasonic DP-190 Operating Instructions - Page 40
Printer Settings (For Key Operator
View all Panasonic DP-190 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Function ■ Printer Settings (Continued) No. Modes 05 2-SIDED PRINT 06 BIND POSITION 07 RESOLUTION 08 FONT (PCL)*1 09 SYMBOL TABLE (PCL)*1 10 PITCH (PCL)*1 11 POINT SIZE (PCL)*1 12 LINES/PAGE (PCL)*1 13 RETURN CHARACTER (PCL)*1 14 MUTUAL A4/LETTER 15 MAILBOX MEMORY*2 Function Selects whether the 2-Sided print setting is enabled. 1:OFF / 2:ON Initial Setting 1:OFF Sets the bind position. 1:LONG EDGE / 2:SHORT EDGE 1:LONG EDGE Sets the resolution setting. 1:300dpi / 2:600dpi / 3:1200dpi 2:600dpi Sets the PCL font. 0 0-99 Sets the PCL symbol table. 11 0-35 Sets the PCL pitch. 0.44-99.99 10.00 Sets the PCL point size. 4.00-999.75 12.00 Sets the PCL lines/page. 60 5-128 Sets the PCL return character. 1:CR / 2:CR+LF 1:CR Selects whether the mutual size A4/LETTER is 1:OFF enabled. 1:OFF / 2:ON Indicates the mailbox memory status. 19 KEY OPERATOR MODE Inputs the key operator password. ENTER PASSWORD = *1 Available only when the optional Printer Controller Module is installed. *2 Available only when the optional Hard Disk Drive Unit is installed. The following Parameter Settings require the input of the Key Operator Password: ■ Printer Settings (For Key Operator) No. Modes 00 PRINTER SETTINGS Function Prints the printer settings. PRESS SET TO PRINT Initial Setting 01 COMPLETION TIME Sets the job completion time setting. 1-999SEC (second) 180SEC 02 PAGE PROTECTION Selects whether to enable automatic 1:OFF compression when the received data exceeds the page memory capacity. (This is accomplished by reducing resolution, and/or deleting pixels to fit the data onto the available page memory, then print it out.) When the setting is in the "OFF" position, upon exceeding the page memory capacity, the print job is deleted and an Error message is displayed. 1:OFF / 2:ON 40