Panasonic MC-UL429 Operating Instructions - MCUL429 - Page 42
BEFORE REQUESTING SERVICE / Antes de pedir servicio - belts
View all Panasonic MC-UL429 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
BEFORE REQUESTING SERVICE WARNING Electrical Shock or Personal Injury Hazard Disconnect the electrical supply before servicing or cleaning the vacuum cleaner. Failure to do so could result in electrical shock or personal injury from vacuum cleaner suddenly starting. Review this chart to find do-it-yourself solutions for minor performance problems. Any service needed, other than those described in these Operating Instructions, should be performed by an authorized service representative. PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION Vacuum Cleaner won't run. 1. Unplugged at wall outlet. 2. ON/OFF switch not turned ON. 3. Tripped circuit breaker/blown fuse. 4. Tripped thermal protector. 1. Plug in firmly, push on/off switch to on. (pages 16 & 17) 2. Push ON/OFF switch to ON. (page 17) 3. Reset circuit breaker or replace fuse at household service panel. 4. Reset thermal protector. (page 25) Poor job of dirt pick-up. 1. Full or clogged dust bin. 2. Dirty filters. 3. Hose not inserted fully. 4. Clogged nozzle or dust bin. 5. Clogged hose. 6. Carpet/Bare floor selector in BARE FLOOR position. 7. Worn agitator. 8. Hole in hose. 9. Broken/misplaced belt. 10. Belt not installed on motor shaft. 1. Empty dust bin. (page 27) 2. Change/clean filters. (pages 29-33) 3. Insert hose fully. (page 12) 4. Clean nozzle or dust bin. (page 39) 5. Clean hose. (page 39) 6. Select CARPET position. (page 24) 7. Replace agitator. (page 34) 8. Replace hose. 9. Replace/fix belt. (page 34) 10. Install belt on motor shaft. (page 34) Agitator not turning 1. Carpet/Bare floor selector in BARE FLOOR position. 2. Belt installed incorrectly. 3. Broken belt. 1. Select CARPET position. (page 24) 2. Check REPLACING BELT. (page 34) 3. Replace belt. (page 34) Air flow restricted 1. Tool use restricts air flow. with attachment use, 2. New carpet fuzz clogged or sound changes. air path. 1. Check tools. 2. Check REMOVING CLOGS clean hose. (page 39) U.S. 1-855-726-2495 (TOLL FREE) - 42 - www.panasonic.com