Panasonic PT-AE1000U Hd Home Cinema Projector - Page 11

Preparation About Your Projector Remote control J Front, back and top view While the MAIN POWER is on, switch between standby mode and project mode. (page 20) Display the Main menu. Return to the previous menu. (page 29) Navigate through the menus with F G H I, and activate the menu item with ENTER. (page 28) Reset some of the settings to the factory default settings. (page 22) Battery compartment 1. Press the tab and lift up the cover. 2. Insert the batteries according to the polarity diagram indicated inside. Switch to cycle through the input method. (page 23) Switch to cycle through the aspect ratio. (page 23) Display the input waveform. (page 24) Remote control signal emitter Turn the button backlight of Remote control on/off. (page 22) Function buttons Assign the frequently used functions from the option for shortcut. (page 39) Learning Remote control buttons and LCD Program and operate other devices. See "Remote Control Operating Guide". Return to the previous menu. (page 28) Capture the projected image as a still picture. (page 22) Adjust the focus and size of the image. (page 25) Switch to cycle through the PICTURE MODE. (page 25) Display the PICTURE menu. (page 25) Turn off the POWER automatically by setting the duration. (page 22) Display the MEMORY LOAD menu. (page 25) Display the COLOR MANAGEMENT menu. (page 26) NOTE: Do not drop the Remote control. Avoid contact with liquids or moisture. Remove the batteries if not using the Remote control for a long period of time. Do not use rechargeable batteries. Do not keep pressing the Remote control buttons as this may shorten battery life. ENGLISH - 11