Panasonic PT-AE1000U Hd Home Cinema Projector - Page 13

Preparation J Back and bottom view Air intake port Security lock Attach the commercial shackle lock, manufactured by Kensington, to protect your projector. Compatible with the Kensington MicroSaver Security System. About Your Projector Top cover Hold at the back corner of the Top cover and slightly push up to open. (page 42) Air intake port AC IN Connect the Power cord to supply electronic power to the projector. (page 19) Front leg adjusters Screw up/down to adjust the projection angle. (page 21) Lens cover attachment hole SERIAL Connect a compatible cable for controlling the projector remotely via your PC. PC IN Connect an RGB signal cable from your PC. Connecting terminals (page 18) COMPONENT 1 IN Connect a YPBPR signal cable. S-VIDEO IN Connect a S-VIDEO signal cable. VIDEO IN Connect an RCA composite video cable. HDMI IN Connect HDMI signal cables. COMPONENT 2 IN Connect a YPBPR signal cable. NOTE: Do not cover the ventilation openings or place anything within 50 cm (20") of the vents as this may cause damage or injury. This projector should only be used with the attached Power cord to ensure optimum performance and avoid damage to the projector. Do not open the Top cover other than replacing the lamp unit. ENGLISH - 13