Panasonic PT-AE1000U Hd Home Cinema Projector - Page 47
Control commands, Appendix
UPC - 791871111390
View all Panasonic PT-AE1000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Technical Information J Control commands Command PON POF IIS OMN OEN OBK OCU/OCD/ OCL/OCR OLE OST OFZ OOT OSH OVM OWM VS1 VPM Control contents Power ON Power OFF INPUT MAIN ENTER RETURN Navigation buttons LENS CONTROL DEFAULT FREEZE SLEEP SHUTTER PICTURE WAVEFORM ASPECT PICTURE MODE Remarks In standby mode, all commands other than the PON command are ignored. The PON command is ignored during lamp ON control. If a PON command is received while the cooling fan is operating after the lamp has switched off, the lamp is not turned back on again straight away in order to protect the lamp. Parameter: (page 23) VID = VIDEO IN RG1 = PC IN CP2 = COMPONENT1 IN SVD = S-VIDEO IN HD1 = HDMI1 IN HD2 = HDMI2 IN CP2 = COMPONENT2 IN Displaying Main menu Activating the selected items in menu mode. Returning to the previous menu or escaping from the menu mode. OCU = F button OCD = G button OCL = I button OCR = H button Activating the LENS CONTROL menu. Resetting to the factory default setting. (page 22) Freezing the projected screen. Parameter: 0 = OFF 1 = ON Setting the duration of time to turn off the power automatically. 0 = OFF 1 = 60 min. 2 = 90 min. 3 = 120 min. 4 = 150 min. 5 = 180 min. 6 = 210 min. 7 = 240 min. (page 25) Turning off the projection temporarily. Send the command to switch between ON and OFF. Do not send the command consecutively. Activating the PICTURE menu. Send the command to switch menu items. (page 28) Activating the WAVEFORM. Parameter: 0 = OFF 1 = FULL SCAN (Y) 2 = FULL SCAN (R) 3 = FULL SCAN (G) 4 = FULL SCAN (B) (page 24) 5 = SINGLE LINE SCAN (Y) 6 = SINGLE LINE SCAN (R) 7 = SINGLE LINE SCAN (G) 8 = SINGLE LINE SCAN (B) Switch the aspect ratio. (page 23) Parameter: (page 25) NAT=COLOR1 DYN=DYNAMIC CN2=CINEMA2 VID=COLOR2 NOR=NORMAL CN1=CINEMA1 CN3=CINEMA3 Appendix ENGLISH - 47