Panasonic PT-AE1000U Hd Home Cinema Projector - Page 21
PROJECTING AN IMAGE, Selecting the input signal, Positioning the image
UPC - 791871111390
View all Panasonic PT-AE1000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Basic Operation Projecting an image Selecting the input signal 1. Switch on the connected devices. Press the play button of the required device. 2. Press the INPUT button to select the required input method if needed. See "Switching the input signal" on page 23. The image will be projected on the screen. NOTE: AUTO SEARCH is ON as default and the signal from the connected devices is detected automatically. See "AUTO SEARCH" on page 38. Positioning the image 1. Press ASPECT to select the required aspect mode. See "Switching the aspect ratio" on page 23. 2. Adjust the projected image with the Lens shift dials. See "Lens shift and positioning" on page 16. 4. Adjust the focus and the projected image size. Press +/- of the FOCUS and ZOOM buttons to adjust. Press the LENS button to adjust the focus and zoom by Remote control. see "LENS CONTROL Menu" on page 37 3. Adjust the angle of the projector. Screw down the Front leg adjuster and adjust the angle vertically. NOTE: Do not touch the Air exhaust port as this may cause burns or injury. If keystone distortion occurs, see "KEYSTONE" on page 36. ENGLISH - 21