Panasonic PT-AE1000U Hd Home Cinema Projector - Page 34
Position Menu, H - Position, Dot Clock, Clock Phase
UPC - 791871111390
View all Panasonic PT-AE1000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
POSITION Menu See "Navigating through the MENU" on page 28. DOT CLOCK If you have interference patterns on the projected image, which is sometimes referred to as moire or noise, you can minimize it by pressing I H to adjust the clock frequency. H - POSITION You can move the projected image horizontally for fine adjustment. Move left Move right NOTE: If the projecting signal's dot clock frequency is higher than 150 MHz, the adjustment may not make a difference. V - POSITION You can move the projected image vertically for fine adjustment. Move down Move up CLOCK PHASE If you require further adjustment for the same reason as the DOT CLOCK adjustment, you can fine adjust the timing of the clock. Press I H to adjust. NOTE: If the projecting signal's dot clock frequency is higher than 150 MHz, the adjustment may not make a difference. CLOCK PHASE is available with PC signals, and 1 125 (1 080)/50i, 1 125 (1 080)/60i, 1 125 (1 080)/50p, 1 125 (1 080)/60p, 1 125 (1 080)/24p, 750 (720)/50p and 750 (720)/60p signals of COMPONENT connection. Settings 34 - ENGLISH