Panasonic PT-AE1000U Hd Home Cinema Projector - Page 40
MAINTENANCE, TEMP AND LAMP INDICATORE, Controlling alerts - filter
UPC - 791871111390
View all Panasonic PT-AE1000U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
TEMP and LAMP Indicators Controlling alerts If a problem should occur with the projector, the TEMP and/or LAMP indicators will alert you. Respond to the alert as follows. 1. Confirm the POWER indicator status and turn off the projector in the proper way. 2. Find out the cause of the problem. 3. Follow the instructions for each indication below and solve the problem. 4. Turn on the projector in the correct way and confirm the indicator is not indicating a problem any longer. NOTE: If no problem is found or the problem remains, do not turn on the projector. Instead contact an Authorized Service Center. LAMP indicator TEMP indicator Maintenance J TEMP indicator Indicator and projector Illuminating RED and still projecting Flashing RED and POWER is turned off Problem Cause Remedy The temperature inside and/or outside the projector is abnormally high. The ventilation ports are covered. The room temperature is too high. The Air filter is excessively dirty and the ventilation is poor. Remove the object(s) from the ventilation ports or clear around the projector. Reinstall the projector at a temperature controlled place. See "Setting up" on page 14. Clean or replace the Air filter in the proper way. See "Cleaning the Air filter" on page 41. J LAMP indicator Indicator Problem Cause Remedy Illuminating RED Flashing RED LAMP RUNTIME has reached 1 800 hours LAMP circuit failure, abnormal function or (with LAMP POWER set to NORMAL). LAMP is damaged. Lamp unit will run out soon and needs to be replaced. The projector is switched off incorrectly. Replace the Lamp unit. See "Before replacing the Lamp unit" on page 42. Let the LAMP cool down and turn on the projector. If the POWER does not turn on, contact an Authorized Service Center. 40 - ENGLISH