Panasonic PT-LB30 Lcd Projector - Multi-lang - Page 45
Option Settings, Auto Search, Auto Signal, Auto Keystn
UPC - 791871111154
View all Panasonic PT-LB30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Option settings Press the F or G button on the projector or remote control unit to select an item, then press the I or H button to change the setting. OPTION OSD ON AUTO SEARCH ON AUTO SIGNAL ON AUTO KEYSTN ON RGB2 SELECT INPUT RGB/YPB PR AUTO VGA60/480p 480p SXGA MODE SXGA NR OFF BLACKBOARD OFF SELECT ADJ RETRN OPTION BACK COLOR BLUE FRONT/REAR FRONT DESK/CEILING DESK FAN CONTROL STANDARD LAMP POWER HIGH LAMP RUNTIME 10H FUNC 1 DAYLIGHT CONTROL KEY ON AUTO POW.OFF DISABLE POWER MEMORY ON SELECT ADJ RETRN OSD ON The signal name is displayed in the top-right corner of the screen when the input signal is changed. OFF Use this setting when you do not want the signal name to be displayed. NOTE: B The setting for "TV-SYSTEM" will also be displayed when an S-VIDEO/VIDEO signal is being input. AUTO SEARCH This should normally be set to "ON" ON When the power is turned on and "AUTO SETUP" is running, the projector detects which signals are being input, and uses these signals for projection. (If a picture is being projected, the signal source is not automatically changed.) OFF Use this setting when you do not want the signal source to be changed automatically when the power is turned on and "AUTO SETUP" is running. AUTO SIGNAL This should normally be set to "ON". ON "AUTO SETUP" will be carried out automatically when the input signal is changed. OFF "AUTO SETUP" will not function when the input signal is changed. AUTO KEYSTN This should normally be set to "ON". ON During "AUTO SETUP", the angle of tilt of the projector is detected and keystone distortion is corrected automatically. OFF Use this setting when you do not want automatic keystone correction to be carried out during "AUTO SETUP", such as when the screen itself is at an angle. ENGLISH-45 Adjustments and settings